[Oxinator]

I recently bought the K200 and im wondering if there is any possibility to lower the Fuel Tank Capacity of the K200 ?

[room217au]

This is the chassis file for the 6×4. Note the line: tank_size: 1600
Open Part 1 file and look in def\vehicle\truck\ken200\chassis\6×4.sii
The 1600 value is in litres, so gallons are about one-quarter of that. Change ONLY the tank_size value. Touch nothing else.
Save the file. The archive should automatically save the file change too.
All chassis files work the same way.

SiiNunit
{
accessory_chassis_data : 6×4.ken200.chassis
{
name: “@@chassis@@ 6×4”
price: 26000
unlock: 0

info[]: “6×4”
info[]: “800 + 800 @@unit_l@@”
icon: “ken”

model: “/vehicle/truck/k200/new/truck.pmd”
collision: “/vehicle/truck/k200/new/truck.pmc”

residual_travel[]: 0.12 # 1st axle
residual_travel[]: 0.08 # 2nd axle
residual_travel[]: 0.08 # 3rd axle
tank_size: 1600
adblue_tank_size: 400
variant: chs_6x4
look: default

defaults[]: “/def/vehicle/truck/ken200/accessory/trlr_cables/stock.sii”
defaults[]: “/def/vehicle/truck/ken200/accessory/box_steps/shape2.sii”
defaults[]: “/def/vehicle/truck/ken200/accessory/bamper/shape1.sii”
defaults[]: “/def/vehicle/truck/ken200/accessory/bak/shape1.sii”
defaults[]: “/def/vehicle/truck/ken200/accessory/krilo/shape1.sii”

suitable_for[]: “sleep_a.ken200.cabin”
suitable_for[]: “sleep_b.ken200.cabin”

extended_shadow_texture: “/vehicle/truck/k200/textruck/shadow_6x4.tobj”
extended_shadow_intensity: 0.97
extended_shadow_fadeout_start: 10
extended_shadow_fadeout_length: 0
ui_shadow: “/vehicle/truck/k200/new/ui_shadow_6x4.pmd”

powered_axle[0]: false # front axle
powered_axle[1]: true # rear axle
powered_axle[2]: true # rear axle

kerb_weight[0]: 7100.1
kerb_weight[1]: 1900.1
kerb_weight[2]: 1900.1

}
}

[Oxinator]

How can i open it ?
If im opening it with Editor or Notepad++ its just gibberish

[Digital X]

.sii files should open fine with Notepad++.

Make sure to make the .sii “Opens With” in the properties so it is set as always.

 

BTW, how long did it take you to purhcase then receive the purchased truck? I’m hesitant to buy more atm due to lack of updates.

[Oxinator]

Still Gibberish. Are there any things i have to do in Notepad++ before i can read and edit the file ?
I cant even Open the Part 1 File as room217au told. The Part 1 File is allready just gibberish.

And it took like 10 Minutes 😀 Bought it via Paypal and got the Email soon afterwards.

[Digital X]

Shouldn’t have to do anything, I can open chassis def (and any .sii files) just by double clicking as they are set to open with Notepad++

 

Here’s the Mack Superliner’s:

 

[room217au]

“The Part 1 File is allready just gibberish.”

That file is an archive. Like a zip file. Dbl click it to open. A new window will open showing folder tree.
Navigate to the folder I mentioned before (def\vehicle\truck\ken200\chassis)
Then use Notepad++ to open a chassis file.
Make the change to the tank_size parameter, save, and close notepad++
You’ll probably be asked to copy the file back into the archive. Click OK or Yes, or whatever it says. I can’t remember.
That’s it.

[Oxinator]

Ok that worked, i didnt know that i have to open it with an zip opener.
Now everything is lowerd and it worked ingame, so thanks a lot for the Help 🙂

[room217au]

WinX comes with an archive tool. Just dbl click on zip or scs and they’ll open.
7Zip and WinRAR are also good apps to have installed. You can download them for free trial, but they’ll always work, you’ll just get alightly annoying reminders that the programmers resemble starving jazz musicians and could you please buy the software 🙂

[Author]

Posts